How do you change a nissain morrano's tail light?
Open the hatch Remove the black plastic strip outside of the back door weatherstrip now you see two 10mm screws remove them the whole tail light assembly needs to be pulled rearward there are two pawn shaped snaps on the assembly that snap onto the body work. So do not pry outward it will break the pawn shaped snaps (experenced that) I use plastic pry bar set but sometime the assembly will pop out with just a good grip and rear pull. Then you can access each bulb holder Tail light brake light bulb has two filiments. snap assembly in foward rescrew the (2) 10mm and replace the black plastic cover And close the hatch
How do you change a nissain morrano's tail light?
I did this and the instructions are correct. The thing to do to avoid breaking the gray snaps that hold the light is ti jimmy the light enough that you can slide a flat head screw driver between the light and body and then jimmy the gray snap prong loose on top and then the same thing on the bottom
Report Abuse
Greg H must be one of the biggest idiots ever!!!
Report Abuse
I've never had a Nissan Murano, but the procedure for changing a tail-light is pretty much the same for any car.
The lights are accessed from inside the trunk. You will probably have to fold back the carpeting on the inside of the trunk to get to the lights. Once you locate the light that is burned out, just give the socket a twist and pull it out from the fixture. Then you can remove the bulb, replace it with a new one, and put the socket back into the light fixture.
To get the correct replacement bulb, go to an auto parts store. Be sure you know the model and year of your car and exactly which bulb you are replacing. You could even take the burned out bulb to the store with you.
